Car Care Product

Product Details:

Heavy Cut Compound 400 Achieves high gloss in one process step.

Our innovative Menzerna Heavy Cut Compound 400 for automotive clear coats leaves a dazzling impression everywhere. Gets sanding marks out of the way in record time. Works into the finish range thanks to the latest polishing technology with dividing polishing grit.

Product Description Menzerna Heavy Cut Compound 400 (HCC 400) is the innovative sanding polish for automotive clear coats. HCC 400 removes sanding marks and signs of use in the shortest possible time and guarantees a perfect surface. General inf
Recommended Usage 1. Clean surface thoroughly prior to polishing. 2. Shake the bottle prior to use and apply a small quantity of the product onto the polishing pad (a pea-sized drop is sufficient for an area measuring approx. 40 x 40 cm). 3. Use the Menzerna Heavy Cut Foam Pad or Menzerna Lambs wool in the event of heavy signs of use. If using a new or dry pad, apply sufficient polish to prevent the formation of noticeable holograms. 4. Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply light pressure at the start of the polishing process. Take away the pressure in the final cycles and increase the speed of the polishing machine by 10%. 5. If working on very dry coatings, spray a little water onto the surface to prevent dust formation. 6. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible. 7. Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure. 8. Whatever the demands of the surface: Use Menzerna HCC400 with the Soft Cut Foam Pad or a Menzerna Finish in order to achieve a high-gloss finish.

Additional Information:

• Production Capacity: 500
• Delivery Time: 3 DAYS
• Packaging Details: BOX

Product Details:

The all-rounder in top form. Polishes out 3000 grit sanding marks, reliably removes streaks, swirls and clouding, and provides lasting protection for the high-gloss surface. 

Shines with ease and speed, making it ideal for the polishing beginner and for the detailing of employee cars and used vehicles.

Additional Information:

• Production Capacity: 500
• Delivery Time: 3 DAYS
• Packaging Details: BOX

Product Details:

• High performance liquid mineral technology
• Rubbing compound that cuts, handles and cleans up
• Helps to reduce paint finishing time

Product Details:

Menzerna Super Heavy Cut Compound 300 is the ultimate sanding polish for automotive clear coats with maximum sanding effect featuring the latest technology. SHCC 300 removes 1200 grit sanding marks and signs of use in the shortest time without damaging the surface. 

Additional Information:

• Item Code: 300
• Production Capacity: 500
• Delivery Time: 3 DAYS
• Packaging Details: BOX

Product Details:

Why should you clean the engine compartment? Rust prevention, early oil/fluid leak detection, early belt wear detection and cosmetics are among the prime reasons.
To soften the grease and grunge collected on your engine compartment, start the engine, let it warm up for a few minutes and shut it off. The proper cleaning temperature of the engine is warm but not hot spray the entire engine/engine compartment with a quality, non-petroleum based
Cleanex Engine Cleaner. Try to start from the bottom and work up. Cleanex Engine Cleaner will clean thoroughly and not harm the paint or finish of the aluminum components.
Allow the Cleanex Engine Cleaner about 3-5 minutes to work and then use a 100% cotton towel or a SOFT brush to GENTLY agitate the heavily soiled areas.rinse thoroughly with water. There is a debate as to the optimum force of spray to rinse the Cleanex Engine Cleaner.

If any areas need additional cleaning, repeat as necessary. This way you dont have the Cleanex Engine Cleaner dropping on your face as you clean the underside areas.

Additional Information:

• Production Capacity: 5000
• Delivery Time: 3 DAYS
• Packaging Details: BOX

Product Details:

Excelent product heavy duty capacity and durability. works with all types of ceramic no matter what the pressure is .... this is a stainless stell for ceramic coating mesh gauze filter to suit menza pro. suitable for all types of ceramic coating menza pro etc

Additional Information:

• Item Code: 4421
• Production Capacity: 500 ml
• Delivery Time: same day
• Packaging Details: box